Super fine Industries
Home
Contact Us
Enquiry
Get Adobe Flash Player

Steel Cut Wire Shots

Home » Products » Steel Cut Wire Shots


Steel Cut Wire Shots

We are counted amongst the prominent Aluminum Cut Wire Shot Suppliers in India. Cut Wire Shots are made of cold drawn spring steel wire with a high content of carbon and are obtained by cutting wire into lengths equal to the wire diameter, and then making it round, if necessary through the conditioning (rounding) process. The quality is assured in cut wire shot because the wire from which it has been manufactured, is heat treated and cold drawn to achieve hardness and homogeneity. A distinct advantage is that the Cut wire shots do not fracture, break or powder while in use. We also provide Wholesale Steel Cut Wire Shots at the most prolific deals.

Technical & Physical Specifications

  • Cut wire shots are manufactured as per IS 5873/1970.
  • Manufactured using of spring steel wire with
    • Carbon contents : 0.4% to 0.85%
    • Uniform hardness : 400 To 500 HV
    • Grade II as per IS 4454


Available In

  • Cut Form: Due to its sharp edge, it is ideal for cleaning where speed of cleaning is critical and somewhat rough finish is acceptable.
  • Conditioned Form: Rounded off through a conditioning process. It is generally used in shot peening process and in industries such as aerospace, shipping, automotive. Cut wire shots are used for cleaning, deburring, descaling, shot peening on components of iron and steel. Depending upon the applications, various hardness ranges are available.


Advantages of Cut Wire Shots

  • Lower surface contamination
  • Do not break, hence no dust
  • Reduce the cost of break down and maintenance
  • Reduce the processing time in peening/blasting
  • Give Smooth and bright finish
  • Double the life as compared to steel shots approximately
  • Available in equal hardness and sizes
  • Whole bodied shot with no scales or oxides present


Specifications

Chemical Composition Carbon : 0.4 to 0.85
Manganese : 0.7 to 1.0
Sulphur : 0.021 MAX
Phosphorous : 0.025 Max
Silicon : 0.2 to 1.1
Hardness Uniform Standard hardness 40 - 50 RC
High Hardness 50-60 RC
Sizes 0.5mm to 2.5mm
Shapes As- cut and Conditioned
Microstructure Tempered Martensite
Porosity Nil
Blow holes and Tails Nil
Minimum density 7.8 g/cm3
Tensile Strength 160 / 180 Kg. mm2
Packing available 25 kgs. Double lined HDPE Bags.



Select Language:

English French German Italian Portuguese Spanish